SN50V3-LS Solar Powered LoRaWAN Wireless Sensor Node

The SN50V3-LS is the 3rd generation of the LSN50 series generic sensor node from Dragino. It is an open-source project and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.

SN50V3-LS LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by a solar panel + Li-ion battery for long-term use.SN50V3-LS is designed to facilitate developers to quickly deploy industrial-level LoRa and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create, and connect your things everywhere.

SN50V3-LS wireless part is based on SX1262, allowing the user to send data and reach extremely long ranges at low data rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

SN50V3-LS has a powerful 48 MHz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.

SN50V3-LS has a built-in BLE module, the user can configure the sensor remotely via a Mobile Phone. It also supports OTA upgrades via private LoRa protocol for easy maintenance.

Features:

LoRaWAN 1.0.3 Class A

SX1262 LoRa Core

Ultra-low power consumption

Open-source hardware/software

Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

Support Bluetooth v5.1 and LoRaWAN remote configuration

Support wireless OTA update firmware

Uplink on periodically

Downlink to change the configuration

Solar panel + 3000mAh Li-on battery

IP65 Water Proof

External LoRa Antenna

MicroController:

MCU: 48Mhz ARM

Flash: 256KB

RAM: 64KB

Common DC Characteristics:

Supply Voltage: 2.5v ~ 3.6v

Operating Temperature: -40 ~ 85°C

LoRa Spec:

Frequency Range, Band 1 (HF): 862 ~ 1020 MHz

Max +22 dBm constant RF output vs.

RX sensitivity: down to -139 dBm.

Excellent blocking immunity

I/O Spec (Multiplex Pins):

Battery output (2.6v ~ 3.6v depends on battery)

+5V controllable output

3 x Interrupt or Digital IN/OUT pins

3 x one-wire interfaces

1 x UART Interface

1 x I2C Interface

Battery:

Solar panel + 3000mAh Li-on battery

Capacity: 3000mAh

Power Consumption:

Sleep Mode: 5uA @ 3.3v

LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm

Package Includes:

1 x SN50V3-LS sensor node

Dimensions and Weight:

Device Size: 9.7 x 6.5 x 4.7 cm

Device Weight: 150g

Package Size / pcs: 14.0 x 8 x 5 cm

Weight / pcs: 180g 

Order Info:

SN50V3-LS-YY:

XX: the default frequency band

EU433: Default frequency band EU433

CN470: Default frequency band CN470

EU868: Default frequency band EU868

IN865: Default frequency band IN865

KR920: Default frequency band KR920

AS923: Default frequency band AS923

AU915: Default frequency band AU915

US915: Default frequency band US915

YY:

NH: No Hole

12: With M12 IP68 waterproof cable hole(default)

16: With M16 IP68 waterproof cable hole

20: With M20 IP68 waterproof cable hole

Useful Link:

Datasheet

User Manual

Firmware

Certificate