secure-payment

Payment Term is DELIVERY AGAINST PAYMENT, we DO NOT accept C.O.D. orders. We accept the PayPal, Credit Card and Wire Transfers.

QUECTEL BG95-M3 DIP40CORE-A KIT LPWA+GSM+NBIOT+CATM With GPS

Name: QUECTEL BG95-M3 DIP40CORE-A KIT LPWA+GSM+NBIOT+CATM With GPS
Brand: Odlstore
SKU: ODL23091103
Price: 40 USD
Availability: InStock

Reference ODL23091103

The BG95-M3 DIP40CORE-A KIT is ll function pins are drawn out, convenient for customers to integrate into the product.

$40.00

Quantity

In stock: 298 Items

Grade

Write your review

Security policy

Your payment information is processed securely. We never store credit card details.

Delivery policy

Orders are dispatched within 1-2 business days with tracking where available.

Return policy

30-day return policy for unused items in original packaging. Contact us first.

Description
Product Details

Description

Introduction

The product size is small, the module BG95 all function pins are drawn out, convenient for customers to integrate into the product.

Features

The following table describes the detailed features of BG95-M3 DIP40CORE-A KIT.

Size information		56mm×29.4mm×1.0mm
Supported Bands	CAT M1	LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85
	CAT NB2	LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85
	EGPRS	GSM850/EGSM900/DCS1800/PCS1900
GNSS		GPS, GLONASS, BDS, Galileo and QZSS 1 Hz data update rate by default
Internet Protocol Features		Supports PPP/TCP/UDP/SSL/TLS/FTP(S)/HTTP(S)/NITZ/PING/MQTT/ LwM2M/CoAP/IPv6 protocols Supports PAP and CHAP for PPP connections
SMS		1.Text and PDU mode 2.Point to point MO and MT 3.SMS cell broadcast 4.SMS storage: ME by default
PCM Interface		Supports one digital audio interface: PCM interface for VoLTE or GSM CS voice
(U)SIM Interface		Support 1.8 V USIM/SIM card only
USB Interface		Compliant wit Support operations at low-speed and full-speed Used for AT command communication, data transmission, GNSS NMEA output, software debugging and firmware upgrade Support USB serial drivers for Windows 7/8/8.1/10/11,Linux 2.6-5.18, Android 4.x/5.x/6.x/7.x/8.x/9.x/10.x/11.x/12.x
UART Interface	Main UART	Used for data transmission and AT command communication 115200 bps baud rate by default The default frame format is 8N1(8 data bits, no parity,1 stop bit) Support RTS and CTS hardware flow control
	Debug UART	Used for software debugging and log output Support 115200 bps baud rate
	GNSS UART	Used for GNSS data and NMEA sentences output 115200 bps baud rate by default
AT Commands		3GPP TS 27.007 and 3GPP TS 27.005 AT commands,as well as Quectel enhanced AT commands
ROHS		All hardware components are fully compliant with EU RoHS directive

Pin Assignment

The following tables show the pin definition and description of BG95-M3 DIP40CORE-A KIT.

pin assignment of BG95 40PIN DTP PCBA	pin assignment of BG95 module	Pin Name	Description	DC Characteristics	Comment
1		GND	Ground
2		VIN	Power supply for the PCBA	Vmax = 12 V Vmin = 4.8 V Vnorm = 5 V	Cannot be used simultaneously with VBAT pins
3	23	D-TXD	Debug UART transmit	VOLmax = 0.45 V VOHmin = 1.35 V	1.8 V power domain. If unused, keep this pin open.
4	22	D-RXD	Debug UART receive	VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
5	17	RESET	Reset the module	Vnorm = 1.5 V VILmax = 0.45 V
6	15	PWRKEY	Turn on/off the module	Vnorm = 1.5 V VILmax = 0.45 V	PWRKEY should never be pulled down to GND permanently
7	7	PCM-DOUT	PCM data output	VOLmax = 0.45 V VOHmin = 1.35 V	1.8 V power domain. If unused, keep this pin open.
8	6	PCM-DIN	PCM data input	VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
9	5	PCM-SYNC	PCM data frame sync	VOLmax = 0.45 V VOHmin = 1.35 V	1.8 V power domain. If unused, keep this pin open.
10	4	PCM-CLK	PCM clock	VOLmax = 0.45 V VOHmin = 1.35 V	1.8 V power domain. If unused, keep this pin open.
11	18	W-DISABLE	Airplane mode control	VILmin =-0.3 V VILmax = 0.6 VVIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. Pulled up by default.When it is in low voltage level, the module can enter airplane mode. If unused, keep this pin open.
12	20	STATUS	Module operation status indication	VOHmin = 1.35 V VOLmax = 0.45 V	1.8 V power domain. If unused, keep this pin open.
13	66	GPI05	General-purpose input/output	VOLmax = 0.45 V VOHmin = 1.35 V VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
14	65	GPIO4	General-purpose input/output	VOLmax = 0.45 V VOHmin = 1.35 V VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
15	64	GPIO3	General-purpose input/output	VOLmax = 0.45 V VOHmin = 1.35 V VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
16	86	GPI07	General-purpose input/output	VOLmax = 0.45 V VOHmin = 1.35 V VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
17	84	GRFC2	Generic RF controller	VOLmax = 0.45 V VOHmin = 1.35 V	BOOT CONFIG. Do not pull it up before startup. 1.8 V power domain. If unused, keep this pin open.
18	83	GRFC1	Generic RF controller	VOLmax = 0.45 V VOHmin = 1.35 V	1.8 V power domain. If unused,keep this pin open.
19	96	PON TRIG	Wake up the module from PSM		1.8 V power domain. Rising-edge triggered. Pulled-down by default. If unused, keep this pin open.
20	1	PSM-IND	Power saving mode indication	VOHmin = 1.35V VOLmax =0.45 V	1.8 V power domain. If unused, keep this pin open.
21	87	GPI08	General-purpose input/output	VOLmax = 0.45 V VOHmin = 1.35 V VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
22	88	GPIO9	General-purpose input/output	VOLmax = 0.45 V VOHmin = 1.35 V VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
23	41	I2C-SDA	I2C serial data (for external codec)		External pull-up resistor is required. 1.8 V only. If unused, keep this pin open.
24	40	I2C-SCL	I2C serial clock (for external codec)		External pull-up resistor is required. 1.8 V only. If unused, keep this pin open.
25	39	MAIN-RI	Main UART ring indication	VOLmax = 0.45 V VOHmin = 1.35 V	1.8 V power domain. If unused, keep this pin open.
26	38	MAIN-DCD	Main UART data carrier detect	VOLmax = 0.45 V VOHmin = 1.35 V	1.8 V power domain. If unused, keep this pin open.
27	37	MAIN-RTS	Main UART request to send	VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
28	36	MAIN-CTS	Main UART clear to send	VOLmax = 0.45 V VOHmin = 1.35 V	1.8 V power domain. If unused, keep this pin open.
29	35	MAIN-TXD	Main UART transmit	VOLmax = 0.45 V VOHmin = 1.35 V	1.8 V power domain. If unused, keep this pin open.
30	34	MAIN-RXD	Main UART receive	VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
31	30	MAIN-DTR	Main UART data terminal ready	VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
32	29	VDD-EXT	1.8V output power supply for external circuits	Vnorm = 1.8 V I0max = 50 mA	If unused, keep this pin open
33	28	GNSS-RXD	GNSS UART receive	VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
34	27	GNSS-TXD	GNSS UART transmit	VOLmax = 0.45 V VOHmin = 1.35 V	BOOT CONFIG. Do not pull it up before startup. 1.8 V power domain. If unused, keep this pin open.
35	26	GPIO2	General-purpose input/output	VOLmax = 0.45 V VOHmin = 1.35 V VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
36	25	GPI01	General-purpose input/output	VOLmax = 0.45 V VOHmin = 1.35 V VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
37	19	AP-READY	Application processor sleep state detection	VILmin =-0.3 V VILmax = 0.6 V VIHmin = 1.2 V VIHmax = 2.0 V	1.8 V power domain. If unused, keep this pin open.
38	24	ADCO	General-purpose ADC interface	Voltage range: 0.1-1.8 V	If unused, keep these pins open.
39		VBAT	Power supply for the module	Vmax = 4.3 V Vmin = 3.3 V Vnorm = 3.8 V	Cannot be used simultaneously with VIN pins
40		GND	Ground

Useful Link:

BG95 Datasheet

User Manual

Product Details

Reference ODL23091103

In stock 298 Items

Comments (0)

Grade

4 other products in the same category:

Reference: ODL23091102

BG95-M3 NB-IOT Mini PCIe Cellular Module with LTE Cat M1 /Cat NB2 /EGPRS

(0)

The BG95-M3 NB-IOT Mini PCIe Cellular Module module with integrated GNSS functionality. BG95 provides pin-to pin compatibility with Quectel LTE module EG91/EG95-M3, LPWA module BG96 & BC95, UMTS/HSPA module UG95/UG96 and GSM/GPRS module.

$45.00

Reference: DWM19070704

EM7455 is a cat 6 module (FDD & TDD) 4G LTE PCIe Module

(0)

EM7455 is a cat 6 module (FDD & TDD) 4G LTE PCIe Module DW5811E PN 8J6X0 FDD/TDD LTE CAT6 4G Module 4G Card for E7270 E7470 E7370 E5570 E5470 Precision 7720 7520 3520 7510.

$45.00

Reference: DWM19070701

MC7710 Sierra 4G LTE/HSPA+ 4G 3G Wireless Module WWAN Mini PCI-E Card WCDMA EDGE / GPRS /LTE 800 /900 /2100MHz

(0)

Unlocked Sierra Wireless MC7710 4G LTE/HSPA+ 4G 3G Module WWAN Mini PCI-E Card WCDMA EDGE / GPRS /LTE 800/900/2100MHz.

$79.00

Reference: ODL23102001

Quectel-EC21A 4G LTE / NB-IoT UNO-to-PCIe board Arduino UNO Compatible

(0)

Quectel-EC21A UNO-to-PCI adapter board which allows the telecom module to be used UART(Arduino UNO Compatible) or USB interfaces to supports Quectel EC21 4G/LTE connection.

$85.00

Viewed products

Reference: ODL25022001

SE01-NB NB-IoT Soil Moisture & EC Sensor for IOT Agriculture

(0)

The SE01-NB uses the FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity detects Soil Moisture, Soil Temperature, and Soil Conductivity, and uploads the value via wireless to the NB-IoT IoT Server.

$146.00

On sale!

E22-M22S 433MHz /868MHz /915MHz SPI +22dBm Enhanced Power LoRa Transceiver Module

Reference: DWM20030702

Brand: Semtech

E22-M22S 433MHz /868MHz /915MHz SPI +22dBm Enhanced Power LoRa Transceiver Module

(0)

The E22-M22S 433MHz /868MHz /915MHz SPI +30dBm Enhanced Power LoRa Transceiver Module is based on original imported RFIC SX1268(433MHz) and SX1262(868MHz/915MHz) from SEMTECH, adopts LoRa spread spectrum technology.

$10.50

Reference: ODL22051404

LoRaWAN Helium HNT miner Indoor networking antenna

(0)

LoRaWAN Helium HNT miner Indoor networking antenna available with 433MHz,868MHz and 915MHz.

$30.00

Reference: ODL25022702

MDS120-NB NB-IoT Microwave Radar Distance Sensor

(0)

The MDS120-NB is an NB-IoT Microwave Radar Distance Sensor that uses Microwave Radar to detect the distance between the sensor and different objects supports uplink methods including MQTT, MQTTs, UDP & TCP for different application requirements, and uplinks to various IoT Servers.

$190.00

Follow us on Facebook

Facebook