DWM-NRF24L01 2.4GHz transceiver rf module

Product Contents:

- 1 pieces NRF24L01+ modules
- 1 piece pink anti-static foam protecting pins of modules

Specifications:

- The  NRF24L01+ is a 2.4GHz ISM band transceiver.

- Includes on board support components and a 2.4GHz antenna for easy implementation into designs without      additional hardware.

- Communication range up to 329 feet (100 meters) in ideal conditions.

- A host microcontroller can communicate and configure theNRF24L01+ over a 4-pin Serial Peripheral Interface (SPI).    The configuration registers are accessible through the SPI connection. Configurable parameters include frequency  channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).

- The on chip voltage regulator accepts supply voltages from 1.9 to 3.6V. When using the NRF24L01+ with an Arduino be sure to use the 3.3V output pin from the Arduino board to power the NRF24L01+ module.

- The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.

- Ultra low power consumption as low as 11.3mA transmitting, 13.5 receiving at 2Mbps, 900nA in power down, and  26uA in standby. 

- Internal filtering results in high margins of meeting RF regulatory standards. The module's radio uses GaussianFrequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).

- The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.

- Auto-acknowledge and auto-retransmit.