RAK811 LoRa module complies with the latest LoRaWAN Class A & C protocol specifications, it is simple to access LWPA IOT platforms integrates SX1276 and stm32L with TELEC CE FCC KCC certification.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
RAK811 868MHz/ 915MHz LoRa module complies with the latest LoRaWAN Class A & C protocol specifications, it is simple to access LWPA IOT platforms integrates SX1276 and stm32L with TELEC CE FCC KCC certification.
Long Range LoraWAN operating in the 868 MHz or 915 MHz frequency bands
Lora Point to Point communication in the 860MHz-1020MHz frequency
LoRaWan Protocol Supported,ISM free Band,Full Certification by region.
Small size(22x14x1.7mm) and low power
High Receiver Sensitivity: down to -146 dBm
TX Power: adjustable from 5dBm to 20dBm high efficiency PA, max PA boost up to 20dbm
FSK, GFSK, and LoRa Technology modulation
IIP3 = -11 dBm
Up to 15 km coverage at suburban and up to 5 km coverage at urban area
Easy to use,UART Interface,Serial port AT command,baud rate and air rate online change supported simple ASCII Command set.
Frequency Band: 868MHz/ 915 MHz
Host Interface: UART
TX Power: 14dBm(Typic),20dBm(Max)
Current Consumption: 30mA(TX mode 14dBm),5.5mA(RX mode),7.2uA(Sleep mode)
Dimension:L x W x H: 22 x 14 x 1.7 mm
| Iterm | Value |
| Chip | STM32L151 |
| CPU | Cortex-M3 32MHz |
| ROM | 128KB |
| SRAM | 16KB |
| Open Source | Yes |
| Internal Programming | Support |
| LoRaWAN | Support |
| LoRaWAN Version | 1.0.2 |
| LoRaWAN Region | AR923/AU915/EU868 /IN865/KR920/US915 |
| LoRa P2P | Support |
| Frequency | 868MHz-919.9MHz |
| I/O | 21 |
| ADC | 6 |
| DAC | 0 |
| UART | 2 |
| SPI | 0 |
| I2C | 2 |
1. Automated Meters Reading
2. Home and Building Automation
3. Wireless Alarm and Security Systems
4. Industrial Monitoring and Control
5. Long Range Irrigation Systems
Datasheet
Application Notes
Certification Report
Firmware upgrade
Hardware Design
Software Development
Tools
Q1: What is the model of SMT32 ARM chip?
A1: We use STM32L151CB with CoIDE.
Q2: Where we can get RAK811 AT commands for sending data and configuration.
A2: https://www.rakwireless.com/en/download/RAK811%20LoRa%20Module/Software%20Development
Q3: How can we quick start to use your Lora module?
A3: We provide the arduino compatible board WisNode-lora, pls follow the link to understand the quick start guide.
Q4: How to optimize your Lorawan STACK?
A4: We have open source libary of loraWan stack in github, pls follow the link:
https://github.com/RAKWireless/RAK811_LoRaMac_CoIDE
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: DWM20060201
Reference: DWM18122601
Reference: ODL22022501
Reference: DWM19022402
Reference: DWM19070804
Reference: DWM18011702
Reference: DWM18021302
Reference: DWM18021303
Reference: DWM20022601
Reference: DWM20052801
Reference: DWM19090402
Reference: DWM20022603
RAK811 LoRa module complies with the latest LoRaWAN Class A & C protocol specifications, it is simple to access LWPA IOT platforms integrates SX1276 and stm32L with TELEC CE FCC KCC certification.
check_circle
check_circle
