The E22-M30S 433MHz /868MHz /915MHz SPI +30dBm Enhanced Power LoRa Transceiver Module is based on original imported RFIC SX1268(433MHz) and SX1262(868MHz/915MHz) from SEMTECH, adopts LoRa spread spectrum technology.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
The E22-M30S series is the first wireless module in China to adopt Semtech's SX1268, SX1262 RF chip. This chip provides a variety of modulation methods, such as LoRaTM and traditional GFSK. Its special LoRaTM modulation method increases the communication distance.
| RF Parameter | Value |
Remark |
| Working frequency |
410~493 MHz,850~930 MHz | |
| Transmitting power | 30 dBm |
Max. Power (1W) |
| Receiving sensitivity | -150 dBm |
- |
| Air data rate | 0.018k~300kbps |
- |
| Test distance | 12000m |
In open and clear air, with maximum power, 5dBi antenna gain, height of 2m |
| Hardware Parameter | Value |
Remark |
|
Size |
24 * 38.5 mm |
|
|
Antenna type |
IPEX / Stamp hole |
|
|
Communication interface |
SPI |
|
|
Package |
SMD |
|
| Electronic parameter | Min. | Typ. | Max. | Unit | Condition |
| Power supply |
2.5 | 5 | 5.5 | V | |
| Communication level | 1.8 | 3.3 | 3.7 | V | |
| Transmitting current |
600 | 650 | 700 | mA | 30dBm（1W） |
| Receiving current |
12 |
14 | 16 | mA | |
| Sleep current |
1 |
3 | 5 | nA | |
| Operating temperature |
-40 | 20 |
+85 | ℃ | |
| Operating humidity |
10 | 60 |
90 | % | |
| Storage temperature |
-40 | 20 |
+125 | ℃ |
| Pin No. |
Pin Item | Pin Direction | Pin Application |
|
1 |
GND |
- |
Ground |
|
2 |
GND |
- |
Ground |
|
3 |
GND |
- |
Ground |
|
4 |
GND |
- |
Ground |
|
5 |
GND |
- |
Ground |
|
6 |
RXEN |
Input |
RF switch RX control，connecting external MCU IO, valid in high level |
|
7 |
TXEN |
Input |
RF switch TX control，connecting external MCU IO or DIO2, valid in high level |
|
8 |
DIO2 |
Input/Output |
Configurable IO port（see more SX1262,Sx1268 datasheet） |
|
9 |
VCC |
- |
Power supply, 2.5V~5.5V（external ceramic filter capacitoris recommended） |
|
10 |
VCC |
- |
Power supply, 2.5V~5.5V（external ceramic filter capacitoris recommended） |
|
11 |
GND |
- |
Ground |
|
12 |
GND |
- |
Ground |
|
13 |
DIO1 |
Input/Output |
Configurable IO port（see more in SX1262,Sx1268 datasheet） |
|
14 |
BUSY |
Output |
State indicator（see more in SX1262,Sx1268 datasheet） |
|
15 |
NRST |
Input |
Chip reset initiation, valid in low level |
|
16 |
MISO |
Output |
SPI master input slave output |
|
17 |
MOSI |
Input |
SPI master output slave input |
|
18 |
SCK |
Input |
SPI clock |
|
19 |
NSS |
Input |
Chip select，for starting a SPI communication |
|
20 |
GND |
- |
Ground |
|
21 |
ANT |
- |
Stamp hole（50 ohm impedance） |
|
22 |
GND |
- |
Ground |
n No
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: DWM16092701
Reference: DWM15123001
Brand: Semtech
Reference: DWM17120402
Reference: DWM18021806
Reference: ODL25011703
Reference: DWM16050801
Reference: DWM21061001
Reference: DWM18022201
Reference: DWM18011702
Reference: DWM16122301
The E22-M30S 433MHz /868MHz /915MHz SPI +30dBm Enhanced Power LoRa Transceiver Module is based on original imported RFIC SX1268(433MHz) and SX1262(868MHz/915MHz) from SEMTECH, adopts LoRa spread spectrum technology.
check_circle
check_circle
