The E22-M22S 433MHz /868MHz /915MHz SPI +30dBm Enhanced Power LoRa Transceiver Module is based on original imported RFIC SX1268(433MHz) and SX1262(868MHz/915MHz) from SEMTECH, adopts LoRa spread spectrum technology.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
The E22-M22S series is the first wireless module in China to adopt Semtech's SX1268, SX1262 RF chip. This chip provides a variety of modulation methods, such as LoRaTM and traditional GFSK. Its special LoRaTM modulation method increases the communication distance.
| RF Parameter | Value |
Remark |
| Working frequency |
410~493 MHz,850~930 MHz | |
| Transmitting power | 22 dBm |
Max. Power (160mW) |
| Receiving sensitivity | -147 dBm |
- |
| Air data rate | 0.018k~300kbps |
- |
| Test distance | 6500m |
In open and clear air, with maximum power, 5dBi antenna gain, height of 2m |
| Hardware Parameter | Value |
Remark |
|
Size |
14 * 20 mm |
|
|
Antenna type |
IPEX / Stamp hole |
|
|
Communication interface |
SPI |
|
|
Package |
SMD |
|
| Electronic parameter | Min. | Typ. | Max. | Unit | Condition |
| Power supply |
1.8 | 3.3 | 3.6 | V | |
| Communication level | 1.8 | 3.3 | 3.6 | V | |
| Transmitting current |
95 | 100 | 105 | mA | 22dBm（160mW） |
| Receiving current |
6 |
6.5 | 7 | mA | |
| Sleep current |
1 |
2 | 3 | nA | |
| Operating temperature |
-40 | 20 |
+85 | ℃ | |
| Operating humidity |
10 | 60 |
90 | % | |
| Storage temperature |
-40 | 20 |
+125 | ℃ |
| Pin No. |
Pin Item | Pin Direction | Pin Application |
|
1 |
GND |
- |
Ground |
|
2 |
GND |
- |
Ground |
|
3 |
GND |
- |
Ground |
|
4 |
GND |
- |
Ground |
|
5 |
GND |
- |
Ground |
|
6 |
RXEN |
Input |
RF switch RX control，connecting external MCU IO, valid in high level |
|
7 |
TXEN |
Input |
RF switch TX control，connecting external MCU IO or DIO2, valid in high level |
|
8 |
DIO2 |
Input/Output |
Configurable IO port（see more SX1262,Sx1268 datasheet） |
|
9 |
VCC |
- |
Power supply, 2.5V~5.5V（external ceramic filter capacitoris recommended） |
|
10 |
GND |
- |
Ground |
|
11 |
GND |
- |
Ground |
|
12 |
GND |
- |
Ground |
|
13 |
DIO1 |
Input/Output |
Configurable IO port（see more in SX1262,Sx1268 datasheet） |
|
14 |
BUSY |
Output |
State indicator（see more in SX1262,Sx1268 datasheet） |
|
15 |
NRST |
Input |
Chip reset initiation, valid in low level |
|
16 |
MISO |
Output |
SPI master input slave output |
|
17 |
MOSI |
Input |
SPI master output slave input |
|
18 |
SCK |
Input |
SPI clock |
|
19 |
NSS |
Input |
Chip select，for starting a SPI communication |
|
20 |
GND |
- |
Ground |
|
21 |
ANT |
- |
Stamp hole（50 ohm impedance） |
|
22 |
GND |
- |
Ground |
n No
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: DWM19022401
Reference: DWM16092701
Reference: DWM17120403
Reference: DWM18102303
Brand: Semtech
Reference: ODL25022003
Reference: DWM14102901
Reference: DWM15100701
Reference: DWM18073002
The E22-M22S 433MHz /868MHz /915MHz SPI +30dBm Enhanced Power LoRa Transceiver Module is based on original imported RFIC SX1268(433MHz) and SX1262(868MHz/915MHz) from SEMTECH, adopts LoRa spread spectrum technology.
check_circle
check_circle
