WT32-ETH01 embedded WIFI serial port to Ethernet module based on ESP32 series module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
WT32-ETH01 is an embedded serial port to Ethernet module based on ESP32 series. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices. Reduced development time cost. In addition, the module is compatible with half-pad and connector through-hole design. The board width is a universal width. The module can be directly soldered on the board, the connector can also be soldered, and it can also be used on a breadboard, which is convenient for users to use in different scenarios.
The ESP32 series of ICs are SOCs that integrate 2.4GHz Wi-Fi and Bluetooth dual-mode, with ultra-high radio frequency performance, stability, versatility and reliability, and ultra-low power consumption.
*WT32-ETH01 based on ESP32 dual-core WiSoC with 4MB flash, on-board antenna
* Connectivity
* 10/100M Ethernet via LAN8720A transceiver
* 2.4 GHz 802.11b/g/n WiFi 4 up to 150 Mbps
* Bluetooth 4.2 BR/EDR and LE
* Expansion – 2x 13 through holes and castellated holes with GPIOs, I2C, SPI, 2x UART, EN, LINK, 5V, 3.3V, and GND signals
* Power Supply – 3.3V or 5.5V via headers, minimum 500 mA; typical operating current: 80 mA
* Dimensions – 6 x 2.5 cm
* Temperature Range – -40°C to +85°C
* Certifications – FCC/CE/RoHS
Notice: Will need one of those cheap USB to TTL boards to program the board, and
power it via 5V or 3.3V power input pins.
WT32-ETH01 is a great option for projects not requiring PoE support.
Home automation
Smart home control panel
Wearable electronics
1. SoC Datasheet
ESP32-D0WD/ESP32-D0WD-V3/ESP32-D0WDQ6/ESP32-D0WDQ6-V3/ESP32-D2WD/ESP32-S0WD/ESP32-U4WDH
2. Module Datasheet & Reference Design
ESP32-WROOM-32 Reference Design 1（recommended for mass-produced modules）
ESP32-WROOM-32 Reference Design 2（recommended for developers who design modules themselves）
ESP32-WROOM-32D/U reference design
ESP32 AT Instruction Set and Examples
ESP32 Hardware Design Guidelines
ESP32-Azure IoT Kit Hardware Design Guidelines
ESP32-MeshKit-Sense Hardware Design Guidelines
ESP32 Technical Reference Manual
ESP32 ECO and Workarounds for Bugs
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: DWM17082402
Reference: DWM17082404
Reference: DWM21031005
Reference: DWM17082405
Reference: DWM20060101
Brand: Semtech
Reference: ODL23092701
Reference: ODL23103001
Reference: DWM19022803
WT32-ETH01 embedded WIFI serial port to Ethernet module based on ESP32 series module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices.
check_circle
check_circle
