Arduino W5200 Ethernet Shield with Micro SD card socket and RJ45 Enthernet jack.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
The Ethernet Shield connects your Arduino device to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet.
The Ethernet controller of this Ethernet Shield is W5200. it is twice the buffer size of W5100 and support for up to eight simultaneous TCP/UDP connections. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. Thanks to a lowered RJ45 pot, you can flexibly add most shields on top of this Ethernet Shield.
| Item | Min | Typical | Max | Unit |
|---|---|---|---|---|
| Voltage | 3.5 | 5.0 | 5.5 | VDC |
| Current | 120 | 210 | 350 | mA |
| Supported SD | Micro SD card(More than 2G is not guaranteed) | / | ||
| Supported Connection | TCP/UDP | / | ||
| Dimension | 53.4X68.7 | mm | ||
| Weight | 25 | g | ||
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: DWM20030404
Reference: DWM20030405
Reference: DWM14080702
Reference: ODL22052402
Reference: DWM15041601
Reference: DWM18110502
Reference: DWM15080502
Reference: DWM17111102
Arduino W5200 Ethernet Shield with Micro SD card socket and RJ45 Enthernet jack.
check_circle
check_circle
