Description
The LoRaWAN Pyranometer sensor measures solar radiation. It is suitable to be used to monitor solar activity in solar parks, solar-dependent systems, and others. In order to reduce the ambient temperature effect, a temperature compensation circuit is built into the sensor.
The form factor of the Sensor Hub allows for multiple and/or different sensors to be connected at the same time as well as a solar panel, creating a reliable solar-powered solution.
This solution is suitable in scenarios where solar energy is preferred/needed.
The Splitter cable can connect several Sensor Probes and Probe IOs to a single Sensor Hub port to be powered by the solar power source. The distance between the Sensor Hub and Sensor Probe/Probe IO can be extended via the Extension cable.
Sensor Hub Features:
Full LoRaWAN band support
Based on RAK4630(MCU: nRF52840, Radio Chip: SX1262)
Support Bluetooth for easy setup
Support NFC for easy setup
RUI3-based firmware
Auto-detection of the power source
Auto-detection of the Sensor Probes
Power source：
+12 VDC at 1 A (12 W) power adapter(optional)
Support 12 VDC solar panel
4 x ER18505 Li-SOCl2 batteries holder (battery not included)
Embedded antenna
1 x internal: high-gain and high-efficiency LoRa antenna (also support NB-IoT)
1 x internal: NFC antenna
1 x internal: Bluetooth antenna
High-efficiency LoRa antenna 860～930 MHz
NFC tag for power on and smart connect over BLE
Prevent theft via the hall effect sensor on the exclusive mounting bracket
External interfaces:
2 x SP11 connector (IP67) for multiple-purpose sensors
The SP11 supports a 12 V power adapter and a solar panel kit for external power
IP66-rated waterproof enclosure
Distance between the sensors can be adjusted with the extension cable(default cable length is 2.5 meter)
Sensor Hub Enclosure dimensions:120 x 80 x 39 mm
Working environment:-30° C to +60° C Suitable for outdoor and indoor use
Solar Radiation Sensor Features:
The RK200-03 Pyranometer sensor measures solar radiation. It is suitable to be used to monitor solar activity in solar parks, solar dependent systems, and others. In order to reduce the ambient temperature effect, a temperature compensation circuit is built into the sensor.
|
Parameter
|
Value
|
|
Spectral range
|
300~3200nm
|
|
Range
|
0~2000W/m2
|
|
Sensitivity >
|
7-14μV*W-1*m2
|
|
Measuring angle
|
2π solid angle
|
|
Response time
|
≤35s （99%）
|
|
Cosine correction
|
≤±7%(solar elevation angle=10°
|
|
Temperature effect
|
±2%（-10~+40℃）
|
|
Stability
|
±2%/year
|
|
Operating temperature
|
-40~+80℃
|
Included in the package:
1 x Sensor Hub
1 x Sensor Probe IO
1 x Pyranometer solar radiation sensor
1 x Mounting kit for the sensor
1 x Power supply for the Sensor Hub
Useful Link:
