CMT2110AW HopeRF CMT series single-chip 240MHz to 480MHz OOK transmitter

Descriptions
The CMT2110AW is an ultra low-cost, highly flexible, high performance, single-chip OOK transmitter for various 240 to 480 MHz wireless applications. It is part of the CMOSTEK NextGenRFTM family, which includes a complete line of transmitters, receivers and transceivers. The device only requires 1-wire interface for the external MCU or encoder to send in the data and control the transmission. An embedded EEPROM allows the frequency, output power and other features to be programmed into the chip using the CMOSTEK USB Programmer and RFPDK. Alternatively, in stock products of 315/433.92 MHz are available for immediate demands with no need of EEPROM programming. The CMT2110AW uses a 1-pin crystal oscillator circuit with the required crystal load capacitance integrated on-chip to minimize the number of external components. The CMT2110AW receiver together with the CMT211x transmitter enables an ultra low cost RF link.

Features
     Embedded EEPROM 
       -Very Easy Development with RFPDK
       -All Features Programmable
     Frequency Range: 240 to 480 MHz
    OOK Modulation
    Symbol Rate: 0.5 to 30 kbps
    1wire Interface
    2Output Power: -10 to +13 dBm
    Supply Voltage: 1.8 to 3.6 V
    Current Consumption: 12.4 mA @ +10 dBm
    Sleep Current < 20 nA
    FCC / ETSI Compliant
    RoHS Compliant6-pin SOT23-6 Package

Applications
    Low-Cost Consumer Electronics Applications 
    Home and Building Automation
    Remote Fan Controllers
    Infrared Transmitter Replacements
    Industrial Monitoring and Controls
    Remote Lighting Control
    Wireless Alarm and Security Systems
    Remote Keyless Entry (RKE)

Useful Link:

Click here to view CMT2110AW datasheet

CMOSTEK RFPDK Setup(RF Products Development Kit PC Software)-For Developing stage

CMT211xA-221xA One-Way RF Link Development Kits Users Guide

AN102 CMT2110W-17AW Configuration Guideline(RF PDK Users Guide)

CMOSTEK WriterConfig V1.0.3 Beta(RF Write config PC software)-For mass production stage

CMT211xAW Schematic and PCB Layout Design Guideline